6 Best Replacement Pumps for Craftsman Pressure Washers (November 2026)
The best craftsman pressure washer pump replacement include the EZJOB 2400-2800PSI Pressure Washer Pump Replacement for most 3/4 inch horizontal Craftsman washers, the Hourleey 3/4" Shaft Horizontal Pressure Washer Pump for higher PSI horizontal replacements, and the EZJOB 2400-2800PSI Pressure Washer Pump Replacement for 7/8 inch vertical shaft Craftsman washers.
On this page (9 sections)
- Best Craftsman pressure washer pump replacement picks by shaft type
- How to match a replacement pump to your Craftsman engine shaft
- How these Craftsman pump replacements were compared
- Do I need a horizontal or vertical shaft pump?
- What PSI and GPM should a Craftsman replacement pump have?
- How do I check inlet, outlet and mounting fit?
- What symptoms mean the pump needs replacement?
- How do I install and care for a new Craftsman pump?
- Verdict: best Craftsman pressure washer pump replacement for your model
The best craftsman pressure washer pump replacement for most gas washers is a 3/4 inch horizontal shaft pump rated at 2400 to 2800 PSI and 2.5 GPM. That size matches many Craftsman horizontal engines and covers driveways, patios, fences, siding and vehicles.
Your Craftsman model may use a vertical shaft instead. In that case, a 7/8 inch vertical shaft pump is the right family, and PSI alone will not make a horizontal pump fit.
Our score weighs specs, features and buyer feedback against what you are shopping for. Shaft type comes first in that score, because a pump that does not mount correctly cannot do any cleaning.
Start by finding your Craftsman model number. Then check the engine shaft direction and size, the mounting pattern and the inlet and outlet positions on your old pump.
If your washer still runs but sprays weakly, leaks at the pump or pulses under load, a pump swap can restore it. If the engine will not start or the frame is cracked, a pump alone will not fix the machine.
For a wider view of whole machines, see our guide to the best craftsman pressure washer. It helps you decide when a new washer makes more sense than a repair.
Our picks at a glance
-
1
Best for most 3/4 inch horizontal Craftsman washersEZJOB 2400-2800PSI Pressure Washer Pump Replacement
9.7/10 our score
See it on Amazon -
2
Best for higher PSI horizontal replacementsHourleey 3/4" Shaft Horizontal Pressure Washer Pump
9.6/10 our score
See it on Amazon -
3
Best for 7/8 inch vertical shaft Craftsman washersEZJOB 2400-2800PSI Pressure Washer Pump Replacement
9.3/10 our score
See it on Amazon
- 4
Best for 3400 PSI rear inlet vertical pumpsCheck it - 5
Check itHourleey 7/8" Shaft Vertical Pressure Washer Pump
Best for vertical shaft kits with clear hardware - 6
Best for 3400 PSI horizontal axial pumpsCheck it
Best Craftsman pressure washer pump replacement picks by shaft type
The top pick here is the EZJOB 2400-2800PSI horizontal pump. It earns that spot because a 3/4 inch horizontal shaft is common on Craftsman gas washers, and its 2400 to 2800 PSI range fits many original pumps.
The Hourleey 3/4 inch horizontal pump follows close behind. Its 3400 PSI maximum suits a narrower group of washers, so it scores just below the top pick despite higher pressure.
Vertical shaft owners have three strong choices in this group. The EZJOB vertical pump covers 2400 to 2800 PSI, while the Biswing and Hourleey vertical pumps reach 3400 PSI.
EZJOB 2400-2800PSI Pressure Washer Pump Replacement: Best for most 3/4 inch horizontal Craftsman washers
- 3/4 inch horizontal shaft
- 2400-2800 PSI
- 2.5 GPM
- 3/4 inch thread inlet and M22 outlet
- Aluminum pump body
- Thermal relief valve
A broad fit choice for horizontal shaft Craftsman washers that need restored pressure without replacing the whole machine.
Pros
- Matches 3/4 inch horizontal shaft engines
- Up to 2800 PSI at 2.5 GPM
- Aluminum body with thermal relief valve
Cons
- Will not fit vertical shaft engines
- Fit must be checked against mounting and port positions
This EZJOB pump suits Craftsman owners with a horizontal shaft engine. It is built for 3/4 inch shafts on gas engines in the 196cc to 224cc class, with 5 to 7 HP listed in the specs.
At 2400 to 2800 PSI and 2.5 GPM, it covers the jobs most homeowners expect from a Craftsman washer. That includes driveways, patios, vehicles, fences, siding and outdoor equipment.
The inlet uses a 3/4 inch thread and the outlet uses M22. That pairing matches many standard garden hoses and high pressure hoses, but you should still check your hose connector.
EZJOB lists an aluminum pump body, a thermal relief valve and pre-filled oil. It also includes an easy start valve, chemical injection and an unloader, which support normal startup and bypass protection.
The main trade-off is fit. This pump is for horizontal shaft engines only, so it will not work on a vertical shaft Craftsman model.
Compare shaft size, mounting pattern and port positions before you order.
Hourleey 3/4" Shaft Horizontal Pressure Washer Pump: Best for higher PSI horizontal replacements
- 3/4 inch horizontal shaft
- 3400 PSI
- 2.5 GPM
- 3/4 inch NH inlet and M22 outlet
- Pre-filled with oil
- Double seal system
A higher pressure horizontal option for Craftsman washers whose engine and frame can support 3400 PSI at 2.5 GPM.
Pros
- 3400 PSI maximum output
- Pre-filled oil and double seals
- Includes detergent hose, bolts, shaft key and washers
Cons
- Higher PSI does not suit every Craftsman engine
- Horizontal shaft only
This Hourleey pump suits owners whose Craftsman washer already supports higher output. It is rated at 3400 PSI and 2.5 GPM, which is well above the 2400 to 2800 PSI class.
The higher pressure can cut cleaning time on concrete, siding and wheels. It also demands more from your hoses, wand and engine, so it is not an automatic upgrade for every washer.
It uses a 3/4 inch horizontal shaft, a 3/4 inch NH garden hose inlet and an M22 high pressure outlet. Those connections are common, yet each Craftsman frame still needs its own fit check.
Hourleey says the pump is pre-filled with oil and uses a double seal system. The kit includes a detergent hose, 4 bolts, a shaft key, flat pads, spring washers and a manual.
The trade-off against the top pick is pressure headroom versus risk. Choose this one when your original pump was already a high output unit.
Choose the EZJOB 2800 PSI pump when your Craftsman was a mid range model.
EZJOB 2400-2800PSI Pressure Washer Pump Replacement: Best for 7/8 inch vertical shaft Craftsman washers
- 7/8 inch vertical shaft
- 2400-2800 PSI
- 2.5 GPM
- Rear facing inlet and outlet
- Pre-filled oil
- Double seal system
A vertical shaft pick for Craftsman washers built around a 7/8 inch vertical engine shaft and rear facing hose connections.
Pros
- Made for 7/8 inch vertical shaft engines
- Rear facing ports preserve hose routing
- Pre-filled oil with double seal system
Cons
- Not for horizontal shaft or electric washers
- Lower maximum PSI than the 3400 PSI picks
This EZJOB pump suits Craftsman washers with a 7/8 inch vertical shaft. It is designed for vertical axial gas engines in the 4 to 7 HP class at 3400 RPM.
It delivers up to 2800 PSI at 2.5 GPM. That output fits driveways, patios, decks, siding, fences, vehicles, lawn equipment and outdoor furniture.
Both water connections face the rear. That layout helps when your Craftsman frame was built with back facing hose routing, since hoses keep clear access without wrapping around the engine.
EZJOB lists pre-filled oil, a double seal system, an easy start valve, a thermal relief valve and a built-in unloader. The package also includes a keyway stock and an SAE gas engine flange.
The key limit is shaft direction. This pump is not for horizontal shaft or electric pressure washers.
Brand and PSI alone do not guarantee fit, so measure shaft diameter, keyway, mounting pattern and port direction first.
Biswing Pressure Washer Pump: Best for 3400 PSI rear inlet vertical pumps
- 7/8 inch shaft vertical plunger
- 3400 PSI maximum
- 2.5 GPM
- Rear facing inlet and outlet
- 3/4 inch NH inlet and M22 outlet
- Aluminum alloy body
A higher pressure vertical option for Craftsman washers with a 7/8 inch shaft and rear facing connections.
Pros
- 3400 PSI maximum at 2.5 GPM
- Rear facing inlet and outlet
- Includes detergent hose, bolts, shaft keys, locknuts and pads
Cons
- Cold water use only
- Hose adapter may be needed if your connector differs from M22-14
This Biswing pump suits vertical shaft Craftsman washers that need more pressure. It reaches 3400 PSI at 2.5 GPM and fits most vertical 7/8 inch shaft gas engines in the 180 to 225cc class.
The rear facing inlet and outlet match frames where hoses connect at the back. That can save you from rerouting a hose around the engine or frame.
It uses a 3/4 inch NH garden hose inlet and an M22-14 male thread high pressure outlet. If your pressure washer hose uses a different connector, plan to buy an adapter coupler separately.
Biswing lists a sturdy aluminum alloy pump body and a built-in thermal relief valve. The package includes the pump, a detergent hose, 3 bolts, 2 shaft keys, 3 locknuts and 3 flat pads.
The trade-off is water temperature and connector fit. Biswing limits this pump to cold water use.
This pick makes sense when your Craftsman is a vertical shaft, high output model with rear facing ports.
Hourleey 7/8" Shaft Vertical Pressure Washer Pump: Best for vertical shaft kits with clear hardware
- 7/8 inch vertical shaft
- 3400 PSI
- 2.5 GPM
- 3/4 inch NH inlet and M22 outlet
- Pre-filled with oil
- Double seal system
A vertical shaft kit for Craftsman washers that need 3400 PSI and 2.5 GPM with mounting hardware in the box.
Pros
- 3400 PSI at 2.5 GPM
- Pre-filled with oil
- Includes detergent hose, bolts, shaft key, washers and manual
Cons
- Vertical shaft only
- Check mounting pattern before ordering
This Hourleey pump suits Craftsman owners with a vertical shaft engine. It is rated at 3400 PSI and 2.5 GPM, so it targets the higher output end of this group.
The 7/8 inch shaft fits many vertical gas engines. Hourleey lists compatibility with Honda, Simpson, RYOBI, Briggs & Stratton, Subaru and Craftsman engines in that shaft family.
It uses a 3/4 inch NH garden hose inlet and an M22 high pressure hose outlet. Those are standard connections, yet you should still confirm your hose thread before you order.
Hourleey says the pump is pre-filled with oil and has a double seal system. The kit includes a detergent hose, 3 bolts, a shaft key, flat pads, spring washers and a manual.
The trade-off is that it is vertical shaft only. It also asks your engine and hoses to handle 3400 PSI.
Pick it when your original Craftsman pump was already in that class, and pick a 2800 PSI vertical pump for a mid range washer.
Biswing Pressure Washer Pump: Best for 3400 PSI horizontal axial pumps
- 3/4 inch shaft horizontal axial plunger
- 3400 PSI maximum
- 2.5 GPM
- 3/4 inch NH inlet and M22 outlet
- Aluminum alloy body
- Thermal relief valve
A horizontal shaft option for Craftsman washers built for 3400 PSI and 2.5 GPM with cold water use.
Pros
- 3400 PSI maximum at 2.5 GPM
- Aluminum alloy body with thermal relief valve
- Includes detergent hose, shaft keys, bolts and pads
Cons
- Cold water use only
- Adapter coupler may be needed for some hoses
This Biswing pump suits horizontal shaft Craftsman washers. It reaches 3400 PSI at 2.5 GPM and fits 3/4 inch shaft gas engines in the 180 to 225cc class.
The horizontal axial plunger design matches frames built for that shaft direction. That makes shaft direction the first check, ahead of PSI or brand name.
It uses a 3/4 inch NH garden hose inlet and an M22-14 male thread outlet. If your hose connector differs, you may need an adapter coupler, so check that fitting before you order.
Biswing lists an aluminum alloy pump body and a built-in thermal relief valve. The package includes the pump, a detergent hose, 2 shaft keys, 4 bolts and 4 flat pads.
The main limits are cold water use and high output. This pump suits a Craftsman washer already rated near 3400 PSI.
For a 2400 to 2800 PSI Craftsman model, the EZJOB horizontal pump is the safer match.
How to match a replacement pump to your Craftsman engine shaft
Match shaft direction and size before you compare PSI. A 3/4 inch horizontal pump will not mount on a 7/8 inch vertical shaft engine, and the reverse is also true.
Start with the engine on your Craftsman washer. Look at whether the crankshaft points sideways or down toward the pump.
That direction tells you which family you need.
Next, measure the shaft diameter. The picks here use 3/4 inch and 7/8 inch shafts, and that small difference decides the whole purchase.
Then check the keyway. The shaft key transfers torque from the engine to the pump, so a missing or wrong key can stop the pump from turning.
Also compare the mounting pattern. Bolt hole spacing and flange shape must line up with your frame, or the pump will sit crooked and leak.
Finally, check inlet and outlet positions. Some Craftsman frames route hoses from the rear, while others use side ports, and the wrong layout can block access.
How these Craftsman pump replacements were compared
We compared shaft size, shaft direction, PSI, GPM, inlet and outlet types and included hardware. Those details decide fit and daily use more than brand name alone.
We also checked engine size ranges. The picks here cover gas engines from about 180cc to 224cc, with horizontal and vertical options in each group.
We looked at hose connections too. Most picks use a 3/4 inch NH inlet and an M22 outlet, which is a common pairing for gas washers.
We did not test these pumps by hand. We compared the stated specs and features, then scored each pump for how well it fits the Craftsman replacement search.
Our score weighs specs, features and buyer feedback against what you are shopping for. A pump with the right shaft and ports scores above a higher PSI pump that may not mount on your washer.
| Product | Best for | Shaft Size | Maximum Pressure | Flow Rate | Our score |
|---|---|---|---|---|---|
| EZJOB 2400-2800PSI Pressure Washer Pump Replacement | most 3/4 inch horizontal Craftsman washers | 3/4 inch horizontal | 2800 PSI | 2.5 GPM | 9.7 |
| Hourleey 3/4" Shaft Horizontal Pressure Washer Pump | higher PSI horizontal replacements | 3/4 inch horizontal | 3400 PSI | 2.5 GPM | 9.6 |
| EZJOB 2400-2800PSI Pressure Washer Pump Replacement | 7/8 inch vertical shaft Craftsman washers | 7/8 inch vertical | 2800 PSI | 2.5 GPM | 9.3 |
| Biswing Pressure Washer Pump | 3400 PSI rear inlet vertical pumps | 7/8 inch vertical | 3400 PSI | 2.5 GPM | 9.0 |
| Hourleey 7/8" Shaft Vertical Pressure Washer Pump | vertical shaft kits with clear hardware | 7/8 inch vertical | 3400 PSI | 2.5 GPM | 8.8 |
| Biswing Pressure Washer Pump | 3400 PSI horizontal axial pumps | 3/4 inch horizontal | 3400 PSI | 2.5 GPM | 8.7 |
Do I need a horizontal or vertical shaft pump?
You need the shaft direction your Craftsman engine already uses. Horizontal means the shaft points sideways.
Vertical means it points down to the pump.
Most Craftsman gas washers in this guide fall into one of those two groups. Your old pump shows the answer, since its shaft and mounting face tell you the layout.
A 3/4 inch horizontal pump suits engines in the 196 to 224cc class listed for the top pick. A 7/8 inch vertical pump suits vertical axial engines in the 4 to 7 HP class.
Horizontal shaft options
Choose horizontal when your engine shaft is 3/4 inch and points sideways. The EZJOB and Biswing horizontal pumps cover that layout.
The EZJOB top pick tops out at 2800 PSI. The Hourleey and Biswing horizontal pumps reach 3400 PSI for higher output washers.
Vertical shaft options
Choose vertical when your engine shaft is 7/8 inch and points down. The EZJOB, Biswing and Hourleey vertical pumps cover that layout.
Rear facing ports matter on many vertical models. They keep hose connections at the back, where the frame was designed to route them.
What PSI and GPM should a Craftsman replacement pump have?
Match the PSI and GPM of your original pump first. A higher PSI pump is not better if your engine, hoses or wand were not built for it.
PSI is pressure. GPM is flow.
Together they describe cleaning power, but each washer has limits set by its engine and frame.
The 2400 to 2800 PSI pumps at 2.5 GPM suit many homeowner Craftsman washers. They handle driveways, patios, decks, siding, fences and vehicles.
The 3400 PSI pumps at 2.5 GPM suit washers already built for that output. They can cut concrete grime and wheel dirt faster, yet they need rated hoses and careful handling.
Our guide to What Is Cleaning Power on a Pressure Washer? explains how PSI and GPM work together. Read it before you jump to the highest PSI in this group.
How do I check inlet, outlet and mounting fit?
Compare inlet size, outlet thread, mounting holes and port direction with your old pump. Those four checks prevent most returns.
Most picks here use a 3/4 inch NH garden hose inlet. That thread matches a standard garden hose, which feeds the pump with water.
Most picks also use an M22 high pressure outlet. Some use M22-14, so check your hose connector if it feels different from a standard M22 fitting.
Mounting holes must line up with your frame. Even a correct shaft size will not help if the bolt pattern or flange shape is wrong.
Port direction also matters. Rear facing inlet and outlet designs suit frames built for back hose routing, while side ports suit other layouts.
What symptoms mean the pump needs replacement?
Low pressure, leaks, pulsing spray or water in the oil area are common pump failure signs. Each symptom can also point to a hose, wand or engine issue, so check the full water path.
Weak spray can come from a worn pump internal parts. A leak at the pump body often points to seals that no longer hold pressure.
Pulsing can come from the unloader or from air in the water line. Bleed air from the system after you connect hoses, then check again under load.
Water leaking from the pump area can also damage nearby parts over time. Shut the washer down and find the leak before you keep running it.
If the engine runs well and the frame is sound, a pump swap is often the smart repair. Our best craftsman pressure washer parts guide covers smaller fixes you may check first.
How do I install and care for a new Craftsman pump?
Install the pump with the engine off, hoses disconnected and the shaft key in place. Work on a flat surface so the pump sits square on the frame.
First, remove the old pump and clean the mounting face. Check the engine shaft for rust, bends or damage before you fit the new pump.
Next, fit the shaft key and align the pump shaft. Tighten the mounting bolts in a steady pattern, then connect the inlet and outlet hoses.
Many picks here are pre-filled with oil. Check the oil level as directed for your pump before you start the engine.
For care, use clean water and a clean inlet screen. Debris that passes the screen can wear seals and plungers faster than normal use.
Also watch water temperature. The Biswing picks list cold water use only, so do not feed them hot water.
Our guide to What Soap Can I Use in a Pressure Washer? helps when you use detergent through the pump. Use only soap made for pressure washers.
A thermal relief valve helps protect the pump when water heats up in bypass mode. It does not replace good habits like not leaving the washer running with the trigger closed for long periods.
After installation, your old hose may still limit performance. See our best craftsman pressure washer hose replacement guide if the hose leaks or feels stiff.
The wand and spray tip affect pressure at the surface too. Our best craftsman pressure washer wand replacement guide covers that next step.
If your connecting gun leaks after a pump swap, a best karcher pressure washer replacement gun style upgrade may help on compatible washers. Check your connector before you buy.
An unloader controls pressure when the trigger is closed. Our best pressure washer unloader valve guide helps if your washer surges or stalls.
Verdict: best Craftsman pressure washer pump replacement for your model
Pick the EZJOB 2400-2800PSI horizontal pump if your Craftsman has a 3/4 inch horizontal shaft and was a mid range washer. It is the safest match for most owners in that group.
Pick the Hourleey 3/4 inch horizontal pump if your Craftsman was already a 3400 PSI class washer. Its higher output fits that narrower group.
Pick the EZJOB 7/8 inch vertical pump if your Craftsman has a vertical shaft and rear facing ports. It restores up to 2800 PSI without asking for high output parts.
Pick the Biswing or Hourleey vertical pumps if your vertical shaft Craftsman was built for 3400 PSI. Check hose ratings and connector type before you order.
The best craftsman pressure washer pump replacement is the one that matches your shaft, ports and original output. Measure first, then buy with confidence.
Our top 3 picks at a glance
-
1
Best for most 3/4 inch horizontal Craftsman washersEZJOB 2400-2800PSI Pressure Washer Pump Replacement
9.7/10 our score
See it on Amazon -
2
Best for higher PSI horizontal replacementsHourleey 3/4" Shaft Horizontal Pressure Washer Pump
9.6/10 our score
See it on Amazon -
3
Best for 7/8 inch vertical shaft Craftsman washersEZJOB 2400-2800PSI Pressure Washer Pump Replacement
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I know which Craftsman pump shaft I need?
Check your engine shaft direction and diameter first. Most picks here split between 3/4 inch horizontal shaft and 7/8 inch vertical shaft designs.
Also compare mounting holes, inlet and outlet direction, and pump height with your old pump before you order.
Can I put a 3400 PSI pump on any Craftsman washer?
No. The engine, frame and hose ratings must support that pressure.
A 3400 PSI pump mainly suits washers already built around that output.
If your original Craftsman washer was a 2400 to 2800 PSI class model, stay near that range.
What causes low pressure in a Craftsman pressure washer?
Worn seals, a damaged unloader, a clogged inlet filter or a pump that leaks can all lower pressure. The pump is not always the cause.
Check for leaks, bent hoses and a dirty inlet screen before you replace the pump.
Do replacement pumps come with oil?
Some picks here are pre-filled with oil. That helps you install the pump without an initial oil fill.
Follow the instructions for your exact pump and check the oil level as directed before first use.
Is a pump replacement cheaper than a new washer?
Often yes, when the engine and frame still work well. You keep the motor, frame, hose and wand and replace only the failed pump.
Now compare the pump cost with a new machine, and factor in your time for installation.
About this guide: Our look at craftsman pressure washer pump replacement draws on maker specs, materials and what owners report. See how we research.



